Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Performance Upgrade: Replaces worn, damaged parts with, in many cases, upgraded materials like high-performance interface gasket material fo...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41.1mm. Width 11.8mm. Thickness 1.95mm. Repla...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...
2 bolt hole type. 42mm between bolt hole centres.
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
All Black Version Front Brake LeverAlloy Version see our SKU: 014449. Alloy Lever with Black Mount see our SKU: 014452. Replacement aftermar...
Koyo 6205-DDU/2RS 6205-2RS-C3. Inner diameter: 25mm. Outer diameter: 52mm. Width: 15mm. Made in Japan.
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Type: K1. 4.40mm x 13.60mm. Can use with or without clip. Made in Japan. Replacement aftermarket part for the following OEM numbers: (Note: ...
Made in Japan. Replacement aftermarket part for Kawasaki OEM 92057-1127.
Inner diameter: 41mm. Outer diameter: 53mm. Thickness: 4.50mm/13.50mm. Replacement aftermarket part for the following OEM numbers: Yamaha 3V...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Koyo 6303DDU. Upgraded from B6303Z. Also known as: 6303LLUC3, 2ASU68. Double sided rubber sealed. Outer diameter: 47mm. Inner diameter: 17mm...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Suitable for fork seals with 53mm outer diameter. Thickness: 1.8mm. Also known as 'Snap Rings'. Replacement aftermarket part for the followi...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Inner diameter: 41mm. Outer diameter: 53mm. Thickness: 8mm with 9.5mm lip. Replacement aftermarket part for the following OEM numbers: Suzuk...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Outer diameter: 37.5mm. Inner diameter: 32mm. Width: 26mm. Replacement aftermarket part for the following OEM numbers: Honda 18391-ML8-000. ...
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
Suitable for early Japanese motorcycles up to 650cc. Black body and spring. 325mm centre to centre of bolt holes. Top pin hole ID 14mm - wid...
