Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
2 bolt hole type. 42mm between bolt hole centres.
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
Type: K1. 4.40mm x 13.60mm. Can use with or without clip. Made in Japan. Replacement aftermarket part for the following OEM numbers: (Note: ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Koyo 6205-DDU/2RS 6205-2RS-C3. Inner diameter: 25mm. Outer diameter: 52mm. Width: 15mm. Made in Japan.
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Performance Upgrade: Replaces worn, damaged parts with, in many cases, upgraded materials like high-performance interface gasket material fo...
All Black Version Front Brake LeverAlloy Version see our SKU: 014449. Alloy Lever with Black Mount see our SKU: 014452. Replacement aftermar...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41.1mm. Width 11.8mm. Thickness 1.95mm. Repla...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Made in Japan. Replacement aftermarket part for Kawasaki OEM 92057-1127.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Outer diameter: 37.5mm. Inner diameter: 32mm. Width: 26mm. Replacement aftermarket part for the following OEM numbers: Honda 18391-ML8-000. ...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Inner diameter: 41mm. Outer diameter: 53mm. Thickness: 8mm with 9.5mm lip. Replacement aftermarket part for the following OEM numbers: Suzuk...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Suitable for fork seals with 53mm outer diameter. Thickness: 1.8mm. Also known as 'Snap Rings'. Replacement aftermarket part for the followi...
Koyo 6303DDU. Upgraded from B6303Z. Also known as: 6303LLUC3, 2ASU68. Double sided rubber sealed. Outer diameter: 47mm. Inner diameter: 17mm...
Inner diameter: 41mm. Outer diameter: 53mm. Thickness: 4.50mm/13.50mm. Replacement aftermarket part for the following OEM numbers: Yamaha 3V...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Suitable for early Japanese motorcycles up to 650cc. Black body and spring. 325mm centre to centre of bolt holes. Top pin hole ID 14mm - wid...
These rear shock absorbers will not fit the 1998 Honda CB250 Nighthawk. Chrome body and spring. 325mm centre to centre of bolt holes. Top pi...
