Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
This float valve is the same one as used in our SKU: 016492 and the following valve assembly OEM numbers: Suzuki: 13370-44B00, 13370-02D00, ...
With Staggered Pins.
Fits cam chains supplied by us only.
Thread 10mm. Spanner size 14mm. Replacement part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-670m, 90308-...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Replacement part for the following OEM numbers: Honda 34901-MC7-602, 34901-MAK-000, 34901-MC7-601, 34901-KEB-620, 34901-MAK-F00. Kawasaki 92...
Note: Any jets in this kit may not be the same size as factory fitted. Made in Japan.
Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces Lucas LLB382 12v 21w Ba15s SCC S25. Replacement part for t...
Height 74mm. Width 69mm. Thread 20mm. Pitch 1.50mm. Replacement for Hiflofiltro HF303, Champion F306, CF Moto CF188. This filter does not co...
Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan to OEM specification. Replacem...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork.
2 bolt hole type. 42mm between bolt hole centres.
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement part for t...
Outer diameter 12.7mm. Length 48.6mm. Spring length 40mm. Made in Japan. Replacement part for the following OEM numbers: Suzuki 59600-04810,...
For use with 12v bulbs up to 23 watt. Rectangle body. Suitable for hazards and any other relay that is 21w x2 +3.4w to 23w x2 +3.4w. Maximum...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a higher rating. Replacement par...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. 22mm ID. Replacement part for Kawasaki OEM 49006-1095. Replac...
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Piston outer diameter 27mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Non-asbestos. Outer diameter 46mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
