2 bolt hole type. 42mm between bolt hole centres.
Outer diameter: 41mm. Inner diameter: 35mm. Width: 25mm. Replacement aftermarket part for the following OEM numbers: Honda 18392-ML0-000, 18...
Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan. Replacement aftermarket part ...
Koyo 6205-DDU/2RS 6205-2RS-C3. Inner diameter: 25mm. Outer diameter: 52mm. Width: 15mm. Made in Japan.
Koyo 6303DDU. Upgraded from B6303Z. Also known as: 6303LLUC3, 2ASU68. Double sided rubber sealed. Outer diameter: 47mm. Inner diameter: 17mm...
79mm length . 90mm total length including the hexagon nut. Not suitable for Honda CB650 SOHC models.
Note: Unfortunately we do not have the Kawasaki KR1/KR1S single friction plate part number 13088-1079 available, please reuse your existing ...
Fuel cap comes with rubber seal that sits between cap and tank. Two keys. Bolt holes: 7. Replacement aftermarket part for Kawasaki OEM 51049...
Inner diameter 37mm. Outer diameter 49mm. Thickness 8mm plus 2.5mm lip. Replacement aftermarket part for the following OEM numbers: Harley D...
Inner diameter 37mm. Outer diameter 49mm. Thickness 13mm.
Top outer length: 770mm. Top free inner length: 51mm. Top fitting: 90' bend, 20' side bend, housing locking tabs. Bottom 1 fitting: 45' bend...
316L stainless steel. Piston outer diameter 43mm. Piston length 34mm. This kit includes a single piston with matching internal oil seal and ...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Please Note: The lead length of this ignition switch is 330mm (13 inches) without a resistor. Non-resistor. Built-in resistor use our SKU: 0...
Piston outer diameter 43mm. Piston length 34mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Suita...
Piston outer diameter 43mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Note: The original relay for many of the Suzuki models (OEM #38610-45031) have the terminals pointing down but this one has the terminals or...
Performance Upgrade: Replaces worn, damaged parts with, in many cases, upgraded materials like high-performance interface gasket material fo...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Stem length 42mm. Thread 6mm. Robust, lightweight, and weather resistant. Complete with bulbs and wiring. Replacement aftermarket part for K...
Height 58mm. Width 76mm. Replacement for Hiflofiltro HF401, HF192; Champion X303. This filter does not come with an O-ring. This will suit t...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Made in Chin...
Outer length: 985mm. Outer top fitting: 45' bend. Outer bottom fitting: 8mm adjuster. Inner overhang: 76mm. Inner top nipple: barrel standar...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Steel sprocket. Replaces JT Sprockets JTF1539-14.
For use on 12v bulbs upto 23w.
