Kawasaki KD80 M 1984 Parts

27mm x 39mm x 10.5mm Fork Oil Seals

Inner diameter 27mm. Outer diameter 39mm. Thickness 10.5mm.

Hendler 25-1292 Wheel Bearing Kit (Koyo Bearings)

This wheel bearing kit uses premium quality Japanese Koyo bearings.

WRP 823054 Exhaust Gasket Kit

Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...

34 Tooth Rear Sprocket JTR802-34

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

6v AC Ignition Coil Single Output + 1 Wire (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

NGK BR7HIX Iridium Spark Plug

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...

Hendler 6v AC Ignition Coil Single Output (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

JT Sprockets 46 Tooth Rear Sprocket JTR802-46

JT Sprockets 42 Tooth Rear Sprocket JTR802-42

NGK B7HS Spark Plug

Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...

JT Sprockets 39 Tooth Rear Sprocket JTR802.39

Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR802.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 34 Tooth Rear Sprocket JTR802.34

Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...

27mm x 39mm Push-Over Type Fork Dust Seals

Inner diameter 27mm. Outer diameter 39mm.

All Balls 25-1292 Wheel Bearing Kit

All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that k...

37 Tooth Rear Sprocket JTR802-37

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

46 Tooth Rear Sprocket JTR802-46

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

JT Sprockets 37 Tooth Rear Sprocket JTR802.37

Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR802.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...