Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Outer diameter (including teeth) 107mm. Thickness 3.2mm. Number of pegs 8. Replacement for Vesrah VP4038.
Outer diameter 99mm. Thickness 1.6mm. Number of pegs 30.
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brake light switch with lead. 2 wires with bullet connectors.
Steel sprocket. Replaces JT Sprockets JTF417-15.
Steel sprocket. Replaces JT Sprockets JTF417-16.
Steel sprocket. Replaces JT Sprockets JTF417-17.
TourMax 2 pin Silicon Rectifier. Replaces Shindengen S5H-02. Also used as Honda clutch switch diode. Made in Japan. Replacement aftermarket ...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. Standard 2.5mm copper core centre...
Steel sprocket. Replaces JT Sprockets JTF417-14.
Steel sprocket. Replaces JT Sprockets JTF417-13.
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR802.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF417.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF417.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF417.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Fit yellow or coloured side of foam facing outwards. If you're working on a vintage or classic motorcycle and the original air filter isn’...
Shaft size 13mm. Length 140mm.