Performance Upgrade: Replaces worn or damaged parts with, in many cases, upgraded materials such as high-performance interface gasket materi...
Outer diameter 99mm. Thickness 1.6mm. Number of pegs 30.
Outer diameter (including teeth) 107mm. Thickness 3.2mm. Number of pegs 8. Replacement for Vesrah VP4038.
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Aftermarket black resistor spark plug cap, equivalent to NGK LB05F and designed for use with 14mm spark plugs that have an exposed threaded ...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brake light switch with lead. 2 wires with bullet connectors.
Steel sprocket. Replaces JT Sprockets JTF417-15.
TourMax 2 pin Silicon Rectifier. Replaces Shindengen S5H-02. Also used as Honda clutch switch diode. Made in Japan. Replacement aftermarket ...
Steel sprocket. Replaces JT Sprockets JTF417-17.
Steel sprocket. Replaces JT Sprockets JTF417-16.
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. Standard 2.5mm copper core centre...
Steel sprocket. Replaces JT Sprockets JTF417-14.
Steel sprocket. Replaces JT Sprockets JTF417-13.
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF417.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF417.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Fit yellow or coloured side of foam facing outwards. If you're working on a vintage or classic motorcycle and the original air filter isn’...
Shaft size 13mm. Length 140mm.
Outer diameter 20mm. Inner diameter 12mm. Width 5mm.
Outer diameter 50.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...