Kawasaki KE100 B 1985 Parts

107mm x 3.2mm Clutch Friction Plate with 8 Pegs

Outer diameter (including teeth) 107mm. Thickness 3.2mm. Number of pegs 8. Replacement for Vesrah VP4038.

DID 428HD-112L Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

DID 428HD-112L Gold Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

34 Tooth Rear Sprocket JTR802-34

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

6v AC Ignition Coil Single Output + 1 Wire (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

6v 2-Pin 23 Watt Indicator Relay 38300-GF0-405

For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...

Hendler 6v AC Ignition Coil Single Output (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

Brake Light Switch Kawasaki 27010-1471

Brake light switch with lead. Lead length 20cm. 2 wires with bullet connectors. Replacement aftermarket part for Kawasaki OEM 27010-1471.

15 Tooth Front Sprocket - 003348

Steel sprocket. Replaces JT Sprockets JTF418-15.

14 Tooth Front Sprocket - 003212

Steel sprocket. Replaces JT Sprockets JTF418-14.

JT Sprockets 34 Tooth Rear Sprocket JTR802.34

Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...

NGK BR8ES Spark Plug (UK Stock) (Resistor)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. Standard 2.5mm copper core centre...

JT Sprockets 15 Tooth Front Sprocket JTF418.15

Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF418.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...

6 Wire Ignition Switch - 006680

6 wires with male spade block and bullet connectors. 2 keys included.

JT Sprockets 14 Tooth Front Sprocket JTF418.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF418.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...

Motobatt MBT6N4 AGM Sealed Battery 6N4-2A 6N4C-1B 6N42A 6N4-2A-4A

Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...

JT Sprockets 42 Tooth Rear Sprocket JTR802-42

14mm x 1mm Piston Circlips

8mm x 13mm Rear Sprocket Nuts

Thread 8mm. Spanner size 13mm. Pitch 1.25mm.

6V 10/3W Stop & Tail Rear Light Bulbs

Air Filter Foam 13" x 12" x 15mm Thick (Kawasaki Style)

Fit yellow or coloured side of foam facing outwards. If you're working on a vintage or classic motorcycle and the original air filter isn’...

Rear Light - 019320

6V 7.5W BA9s Side Light Bulbs

6V 5W BA15s Indicator Bulbs

6V 25/25W Bosch Type BA20D Halogen Headlight Bulbs

Bosch Type BA20D bulb holder use our SKU: 018112.

6V 25/25W Bosch Type BA20D Headlight Bulbs

Bosch Type BA20D bulb holder use our SKU: 018112.

Kickstart Lever - 014159

Shaft size 13mm. Length 140mm.

30mm x 40mm x 38.6mm Push-Over Type Fork Dust Seals 92093-1065

Fits fork tube diameter: 30mm. Push-over internal diameter: 40mm. Overall length: 38.6mm. Type: Push over fork dust seal. Replacement afterm...

20mm x 12mm x 5mm Gear Lever Oil Seal

Outer diameter 20mm. Inner diameter 12mm. Width 5mm.

IRIS 428RX-112 Nickel Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...