Steel sprocket. Replaces JT Sprockets JTF418-15.
Terminal position guide: terminal positions are described like a clock face when looking directly at the terminal end of the coil as shown i...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Outer diameter 120mm. Thickness 1.5mm. Number of pegs 30.
Steel sprocket. Replaces JT Sprockets JTF418-14.
Outer diameter (including teeth) 127mm. Thickness 3mm. Number of pegs 12. Replacement for Vesrah VP4041.
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF418.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF418.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...
6V 6AH. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 97mm x Width: 56mm x Height: 111m...
Outer diameter 42mm. Inner diameter 30mm. Width 8mm.
8 wires with female spade block and bullet connectors. 2 keys included.
Brand: JT Sprockets. Position: Rear. Tooth Count: 44. JT Part Number: JTR469.44. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
Thread 8mm. Spanner size 12mm.
Thread 8mm. Length 30mm. Pitch 1.25mm.
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Bosch Type BA20D bulb holder use our SKU: 018112.
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Inner diameter 28mm. Outer diameter 51mm. Width 11mm.
