Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Replacement aftermarket part for the following OEM numbers: Kawasaki 11013-1062. This will suit the following models as well as those listed...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brake light switch with lead. Lead length 20cm. 2 wires with bullet connectors. Replacement aftermarket part for Kawasaki OEM 27010-1471.
Steel sprocket. Replaces JT Sprockets JTF418-15.
Steel sprocket. Replaces JT Sprockets JTF418-14.
Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF418.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF418.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
6V 6AH. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 97mm x Width: 56mm x Height: 111m...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Bosch Type BA20D bulb holder use our SKU: 018112.
Top outer length: 830mm. Top free inner length: 70mm. Top fitting: standard ferrule. Bottom 1 fitting: standard ferrule. Top nipple: standar...
Shaft size 13mm. Length 140mm.
Length: 37" (940mm). Clock fit: screw over 11mm. Tacho drive end: push in 15mm. Inner type: square/square.
Length: 34" (860mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 37&...
Outer diameter 50.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Suitable for Yamaha models. Piston outer diameter 34mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pisto...
Outer diameter 50.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
