Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Replacement aftermarket part for the following OEM numbers: Kawasaki 11013-1062. This will suit the following models as well as those listed...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brake light switch with lead. Lead length 20cm. 2 wires with bullet connectors. Replacement aftermarket part for Kawasaki OEM 27010-1471.
Steel sprocket. Replaces JT Sprockets JTF418-15.
Steel sprocket. Replaces JT Sprockets JTF418-14.
Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF418.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF418.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
6V 6AH. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 97mm x Width: 56mm x Height: 111m...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Bosch Type BA20D bulb holder use our SKU: 018112.
Top outer length: 830mm. Top free inner length: 70mm. Top fitting: standard ferrule. Bottom 1 fitting: standard ferrule. Top nipple: standar...
Shaft size 13mm. Length 140mm.
Length: 37" (940mm). Clock fit: screw over 11mm. Tacho drive end: push in 15mm. Inner type: square/square.
Length: 34" (860mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 37&...
Piston outer diameter 34mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...
Outer diameter 50.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
