Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Replacement aftermarket part for the following OEM numbers: Kawasaki 11013-1062. This will suit the following models as well as those listed...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
6 wires with female spade block connector. 2 keys included. Wiring from switch to block connector is approximately 180mm. Replacement afterm...
Brake light switch with lead. Lead length 20cm. 2 wires with bullet connectors. Replacement aftermarket part for Kawasaki OEM 27010-1471.
Steel sprocket. Replaces JT Sprockets JTF418-15.
Steel sprocket. Replaces JT Sprockets JTF418-14.
Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF418.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF418.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Steel sprocket. Replaces JT Sprockets JTR458-36.
Steel sprocket. Replaces JT Sprockets JTR458-37.
6V 6AH. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 97mm x Width: 56mm x Height: 111m...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR458.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR458.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Includes 2 tabs, 4 bolts and 4 nuts.
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Outer diameter 130mm. Replacement aftermarket part for Kawasaki OEM 42014-030, 92161-1327.
Outer diameter 46mm. Inner diameter 37mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Bosch Type BA20D bulb holder use our SKU: 018112.
