Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Koyo 6205-DDU/2RS 6205-2RS-C3. Inner diameter: 25mm. Outer diameter: 52mm. Width: 15mm. Made in Japan.
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Outer diameter 12.7mm. Length 37mm. Spring length 40mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 435...
This oil filter remover will only fit filters supplied by Motorcycle Products.
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
2 bolt hole type. 42mm between bolt hole centres.
Complete set of rear wheel hub rubber dampers otherwise known as cush drive rubbers. Length 90mm. Width 38mm. Replacement aftermarket part f...
Thread diameter 49mm. Supplied with diaphragm. Made in Japan.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Kit contains a pair of fork dust seals.
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
An excellent choice for vintage bikes and smaller bikes with less torque, the NZ series chain is a great non-sealed option. Its solid bushin...
Replacement aftermarket part for the following OEM numbers: Honda: 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700, 34901-MGZ-J...
