Kawasaki KX125 A 1975 Parts

275/300-21 Inner Tube with TR4 Valve

Straight TR4 valve.

RK 428-130L XSO XW-Ring Heavy Duty Gold Drive Chain

Suitable for Sport, Touring and Off-Road Use. XW-Ring Chain. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (o...

47mm x 20mm x 14mm Crank Bearing - 007540

Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan to OEM specification.

Heidenau 275/300/325-21 Heavy Duty Inner Tube

Straight valve.

40mm x 17mm x 12mm Wheel Bearing 6203 DDU

Koyo 6203DDU. Double sided rubber sealed. Outer diameter 40mm. Inner diameter 17mm. Width 12mm. Made in Japan to OEM specification. Replacem...

31mm Brake Shoe Springs

31mm between hook centres.

130mm x 28mm Brake Shoes - 001917

Outer diameter 130mm. Width 28mm. Brake shoe springs for these are SKU: 001877. How to measure drum brake shoes: Outer Dimension: Preferably...

8mm x 30mm Rear Sprocket Studs

Thread 8mm. Length 30mm. Pitch 1.25mm.

8mm x 13mm Rear Sprocket Nuts

Thread 8mm. Spanner size 13mm. Pitch 1.25mm.

52mm x 20mm x 15mm Crank Bearing - 007547

Koyo 6304. Outer diameter 52mm. Inner diameter 20mm. Width 15mm. Made in Japan to OEM specification.

20mm x 42mm x 12mm Sprocket Carrier Bearing - 002812

Koyo 6004DDU. Inner diameter 20mm. Outer diameter 42mm. Width 12mm. Made in Japan to OEM specification.

42mm x 20mm x 12mm Wheel Bearing T3800703 AP8125774

Koyo 6004DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 20mm. Width 12mm. Made in Japan to OEM specification. Replacem...

14.50mm x 36.00mm x 2.00mm Clutch Springs

Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.

40mm x 20mm x 7mm Crank Oil Seal

Outer diameter 40mm. Inner diameter 20mm. Width 7mm.

Tourmax 3.92mm x 12.6mm M1 Type Float Valve without Wire Clip

24mm x 16mm x 4mm Kickstart Oil Seal

Outer diameter 24mm. Inner diameter 16mm. Width 4mm.

31mm x 43mm x 12.5mm Push-In Type Fork Dust Seals

Inner diameter 31mm. Outer diameter 43mm. Thickness 12.5mm.

42mm x 26mm x 7mm Wheel Oil Seal 91252-230-003

Outer diameter 42mm. Inner diameter 26mm. Width 7mm. Replacement part for the following OEM numbers: Honda OEM 91252-230-000, 91252-230-005,...

325/350/410-18 Heavy Duty Inner Tube with TR6 Valve

Straight TR6 valve.

NGK LB05F Black Spark Plug Cap

Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement part for the following OEM nu...

21mm x 16mm x 19.5mm Small End Bearing

Outer diameter 21mm. Inner diameter 16mm. Length 19.5mm.

37mm x 25mm x 6mm Drive Shaft Oil Seal

Outer diameter 37mm. Inner diameter 25mm. Width 6mm.

IRIS 428RX-130 Nickel Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...

Con Rod Kit - 008439

This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings.

NGK BR9EIX Spark Plug

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...

40mm x 25mm x 7mm Crank Oil Seal

Outer diameter 40mm. Inner diameter 25mm. Width 7mm.

31mm x 43mm x 12.5mm Fork Oil Seals

Inner diameter 31mm. Outer diameter 43mm. Thickness 12.5mm.

20mm x 12mm x 5mm Gear Lever Oil Seal

Outer diameter 20mm. Inner diameter 12mm. Width 5mm.

TVH 428-130 Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...

NGK LB05F Red Spark Plug Cap

Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement part for the following OEM nu...