Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that k...
Use with our SKU: 006904. Includes push rod, bushing and boot. Brass bush outer diameter 10mm. Brass bush length 10mm. Rod length 41.25mm. M...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Suitable for fork seals with 58mm outer diameter. Thickness 1.6mm. This will suit the following models as well as those listed in fitments: ...
Outer diameter: 22mm. Inner diameter: 12mm. Width: 5.5mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 92049-1228, 9...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Clear version: For amber version use our SKU: 018214. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Outer diameter 14mm. Length 39mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 22886-MB0-305. Kawasaki ....
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.1mm. Width: 12mm. Thickness: 1.95mm. Rep...
Brand cross reference: Vesrah VD435; 231, 259; Ferodo FDB2049; SBS 704. You may need more than a single pair of pads if you have twin discs....
Push-in type. Inner diameter: 43mm. Outer diameter: 55mm. Fitting depth: 4.5mm. Total height: 13.5mm. Fork dust seal dimensions represent th...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. 22mm ID. Replacement aftermarket part for Kawasaki OEM 49006-...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Made in Japan. Replaces Suzuki 43028-1057.
