2 bolt hole type. 42mm between bolt hole centres.
This oil filter remover will only fit filters supplied by Motorcycle Products.
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Koyo 6205-DDU/2RS 6205-2RS-C3. Inner diameter: 25mm. Outer diameter: 52mm. Width: 15mm. Made in Japan.
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Kit contains a pair of fork dust seals.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Koyo 6303DDU. Upgraded from B6303Z. Also known as: 6303LLUC3, 2ASU68. Double sided rubber sealed. Outer diameter: 47mm. Inner diameter: 17mm...
Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan.
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Replacement aftermarket part for the following OEM numbers: Honda 34903-388-611, 34903-KCS-920. and many more TBA.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Outer diameter: 22mm. Inner diameter: 12mm. Width: 5.5mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 92049-1228, 9...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Suzuki OEM 59313-36500.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Everything you need is included in this easy to fit 12v indicator buzzer kit. Fit after the indicator relay and connect the red wire to the ...
