Complete set of rear wheel hub rubber dampers otherwise known as cush drive rubbers. Length 90mm. Width 38mm. Replacement aftermarket part f...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Koyo 6205-DDU/2RS 6205-2RS-C3. Inner diameter: 25mm. Outer diameter: 52mm. Width: 15mm. Made in Japan.
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Includes the electric fuel pump and parts needed to service or rebuild the factory fuel pump module - check image/s. Works Racing Parts (WRP...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Koyo 6001. Outer diameter 28mm. Inner diameter 12mm. Width 8mm. Made in Japan.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Outer diameter: 22mm. Inner diameter: 12mm. Width: 5.5mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 92049-1228, 9...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Kit contains a pair of fork dust seals.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Suzuki OEM 59313-36500.
Brand cross reference: Vesrah VD435; 231, 259; Ferodo FDB2049; SBS 704. You may need more than a single pair of pads if you have twin discs....
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Note: Unfortunately we do not have the Kawasaki KR1/KR1S single friction plate part number 13088-1079 available, please reuse your existing ...
