With Staggered Pins.
Thread 10mm. Spanner size 14mm. Replacement part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-670m, 90308-...
Replacement part for the following OEM numbers: Honda 34901-MC7-602, 34901-MAK-000, 34901-MC7-601, 34901-KEB-620, 34901-MAK-F00. Kawasaki 92...
Outer diameter 14mm. Inner diameter 7mm. Length 38mm. Push-over style. Open both ends. Replacement part for the following OEM numbers: Suzuk...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement part for t...
Outer diameter 12.7mm. Length 48.6mm. Spring length 40mm. Made in Japan. Replacement part for the following OEM numbers: Suzuki 59600-04810,...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan.
Koyo 6203DDU. Double sided rubber sealed. Outer diameter 40mm. Inner diameter 17mm. Width 12mm. Made in Japan to OEM specification. Replacem...
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Fit yellow or coloured side up. If you have an old bike and can't find an air filter for it, you can often make a copy of the original with ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. 22mm ID. Replacement part for Kawasaki OEM 49006-1095. Replac...
Koyo 6303DDU. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 17mm. Width 14mm. Made in Japan to OEM specification. Replacem...
Meet the TireIntended for cruisers and roadsters. The K65 uses a neutral pattern with a well rounded profile, making one of our most prolifi...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement part for Suzuki OEM 59313-36500.
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Koyo 6205DDU. Inner diameter 25mm. Outer diameter 52mm. Width 15mm. Made in Japan to OEM specification.
Piston outer diameter 30mm. Piston length 29mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Suita...
Cylinder head to rocker box mounting rubber. Outer diameter: 20mm. Inner diameter: 10mm. Thickness: 5mm. Replacement part for Kawasaki OEM 9...
Piston outer diameter 30mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise.
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a higher rating. Replacement par...
Inner diameter 30mm. Outer diameter 52mm. Width 1.5mm.
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one.
Thread 6mm. Length 20mm.
Outer diameter 300mm. Inner diameter 61mm. 5 bolt holes. 10mm bolt holes. Non-countersunk.