Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Replacement ...
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement aftermarke...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
2 bolt hole type. 42mm between bolt hole centres.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Made in Japan.
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Materi...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Replacement aftermarket part for the following OEM numbers: Honda 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700, 34901-MGZ-J0...
Clear version: For amber version use our SKU: 018214. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Kelvin is a measurement by colour temperature of the colour produced to a halogen bulb. Colour temperature refers to how warm or cool a bulb...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Outer diameter 20mm. Inner diameter 12mm. Width 5mm.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Suzuki OEM 69186-04F00. Repl...
Voltage: 12v. Wattage: 3.4w. Base width: 8mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 capless ...
As used in motorcycle and other auto vehicle speedo, tacho clocks, dashboards, rear lights, marker lights, indicators. Base width: 9.3mm. Gl...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
The AX in BAX15s denotes that the pins are angled at 150 degrees, unlike BA15s (where the pins are directly opposite). Features of BAX15s. P...
