Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR502.45. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF517.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 18. JT Part Number: JTF517.18. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Outer diameter 152mm. Thickness 3mm. Number of pegs 30.
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR502.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 44. JT Part Number: JTR502.44. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 49. JT Part Number: JTR502.49. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.7-0.8mm gap. Genuine NGK spark ...
Type: K1. 4.40mm x 13.60mm. Can use with or without clip. Made in Japan. Replacement aftermarket part for the following OEM numbers: (Note: ...
Ideal chain for vintage motorcycles where clearance may be limited around chain guards, sprocket retainers or crankcases. Features RK ultra ...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
Outer diameter 14mm. Length 39mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 22886-MB0-305. Kawasaki ....
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Use with our SKU: 006904. Includes push rod, bushing and boot. Brass bush outer diameter 10mm. Brass bush length 10mm. Rod length 41.25mm. M...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Outer diameter 48.5mm. Inner diameter 42.5mm. Width 30mm.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Made in Japan. Replaces Suzuki 43028-1058.
Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...
Upper or Lower depending on whether standard or USD forks. Outer diameter: 43.6mm. Inner diameter: 41.7mm. Width: 20mm. Thickness 0.95mm. Th...
Inner diameter: 35mm. Outer diameter: 51mm + 55mm. Replacement aftermarket part for the following OEM numbers. Honda 53214-MR7-003. and many...
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Outer diameter: 15.72mm. Length: 41.5mm. Spring length: 52mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Hon...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.10mm. Width: 12mm. Thickness: 1.95mm. Re...
