Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Suitable for fork seals with 58mm outer diameter. Thickness 1.6mm. This will suit the following models as well as those listed in fitments: ...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Thread diameter 49mm. Supplied with diaphragm. Made in Japan.
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Performance upgrade use our SKU: 036428 HiFlo HF303RC. Replaces: Champion: COF303, X303. Bosch: 3323. Emgo: 10-82230. Fram: PH6017A. Hiflofi...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Push-in type. Inner diameter: 43mm. Outer diameter: 55mm. Fitting depth: 4.5mm. Total height: 13.5mm. Fork dust seal dimensions represent th...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the front wheel and two for the rear wheel. Koyo: 6005DDU, 6005-2RS-...
Non-asbestos. Outer diameter 42mm. Inner diameter 34mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Inner diameter 43mm. Outer diameter 55mm. Thickness 9.5mm.
Koyo 6006-DDU/2RS 6006-2RS-C3. Inner diameter 30mm. Outer diameter 55mm. Width 13mm. Made in Japan.
Replacement aftermarket part for Kawasaki OEM 11054-1307, 11053-1955. Please Note: These fairing brackets are cheap and nasty in our opinion...
Everything you need is included in this easy to fit 12v indicator buzzer kit. Fit after the indicator relay and connect the red wire to the ...
Koyo 6205DDU. DDU version of 2RSHC3HMTF7. Double sided rubber sealed. Outer diameter: 52mm. Inner diameter: 25mm. Width: 15mm. Made in Japan...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Replacement ...
Outer diameter 54.5mm. Inner diameter 48.5mm. Width 28mm.
