Brand cross reference: OEM245, EBC 368, SBS 791, Ferodo FDB2165, Dunlopad DP935, Vesrah VD997, Galfer FD291. You may need more than a single...
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs. Works Racing Parts (WRP)The WRP brand relies o...
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
This will suit the following models as well as those listed in fitments: KTM 125 Duke ABS 2020-24. KTM 125 RC 2021-24. KTM 200 RC 2021. KTM ...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Outer diameter 45mm. Inner diameter 32mm. Width 7mm.
Includes two caliper pistons. Does not include seals. Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship prog...
Teeth: 51. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Teeth: 45. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Teeth: 49. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Teeth: 47. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Outer diameter 35mm. Inner diameter 25mm. Width 7mm.
Equivalent to Twin Air 154110. This will suit the following models as well as those listed in fitments: KTM 125 MXC 1998-03. KTM 125 SXS 199...
Teeth: 48. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Steel sprocket. Replaces JT Sprockets JTF1901-14.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...
The non-sealed 520MX boasts our highest rated tensile strength among non-sealed chains at 8,930 lbs. and properly handles the beating that c...
The non-sealed 520ERT3 is our #1 selling motocross chain and is used by factory race teams such as Monster Energy Kawasaki, Star Racing Yama...
