Please compare the length and shape with your original lever before ordering, as some models list both short (with return spring & sprin...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Outer diameter 45mm. Inner diameter 32mm. Width 7mm.
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the front wheel and two for the rear wheel. Koyo: 6005DDU, 6005-2RS-...
Outer diameter 24mm. Inner diameter 14mm. Width 6mm.
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the rear wheel sprocket carrier. Koyo: 6906DDU, 6906-2RS-C3. Double ...
Equivalent to Twin Air 154115. This will suit the following models as well as those listed in fitments: Husaberg TE125 2013. Husaberg TE250 ...
This will suit the following models as well as those listed in fitments: Husaberg TE125 2013. Husaberg TE250 2013-14. Husaberg TE300 2013-14...
Outer diameter 30mm. Inner diameter 19mm. Width 7mm.
Replacement aftermarket part for the following OEM numbers: KTM 773.38.005.100, 773.38.005.101. This will suit the following models as well ...
NOTE: This switch is not supplied with a model-specific moulded plug. It has male spade terminals fitted and matching female terminals inclu...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Height 87.2mm. Width 33.2mm. Replacement for Hiflofiltro HF652. This filter does not come with an O-ring. This will suit the following model...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. Standard 2.5mm copper core centre...
Thread 8mm. Spanner size 12mm.
