KTM 300 EXC (USD Forks) 2009 Parts

35mm x 25mm x 7mm Crank Oil Seal

Outer diameter 35mm. Inner diameter 25mm. Width 7mm.

52mm x 38mm x 7mm Crank Oil Seal

Outer diameter 52mm. Inner diameter 38mm. Width 7mm.

JT Sprockets 41 Tooth Rear Sprocket JTR897.41

Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR897.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 38 Tooth Rear Sprocket JTR897.38

Brand: JT Sprockets. Position: Rear. Tooth Count: 38. JT Part Number: JTR897.38. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 46 Tooth Rear Sprocket JTR897.46

Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR897.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...

65mm x 32mm x 17mm Crank Bearing

Koyo 62/32. Outer diameter 65mm. Inner diameter 32mm. Width 17mm. Made in Japan.

13 Tooth Front Sprocket - 003064

Steel sprocket. Replaces JT Sprockets JTF1901-13.

144mm x 2mm Clutch Friction Plate with 12 Pegs

Outer diameter (including teeth) 144mm. Thickness 2mm. Number of pegs 12. Replacement for Vesrah VP0062.

Engine Gasket Set - 010726

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

Starter Relay 2CR-81940-00 4YR-81940-02 2C0-81940-00 58211058000

As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...

TourMax Starter Relay 5JW-81940-00 4BH-81940-02 58211058000

As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...

M10 (10mm) x 1.00mm Banjo Bolt Brake Light Switch (Universal)

NOTE: This switch is not supplied with a model-specific moulded plug. It has male spade terminals fitted and matching female terminals inclu...

141mm x 1.2mm Clutch Metal Plate with 22 Pegs

Outer diameter 141mm. Thickness 1.2mm. Number of pegs 22.

NGK BR7EIX Iridium Spark Plug (Japan)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...

NGK BR7ES Spark Plug (Japan)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. Standard 2.5mm copper core centre...

48.8mm x 46.8mm x 20mm x 1mm Inner Slide Fork Bushings

Upper or Lower depending on whether standard or USD forks. Outer diameter 48.8mm. Inner diameter 46.8mm. Width 20mm. Thickness 1mm.

IRIS 520HTP-116 Gold O-Ring Drive Chain

Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...

IRIS 520RXP-116 Nickel Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...

Steering Head Taper Bearing Kit SST901 (Japanese)

Made in Japan. This kit includes the following bearings: Bearing 1: ID 29mm x OD 50.25mm x Thickness 15mm. Bearing 2: ID 29mm x OD 50.25mm x...

RK 520-116L XSO RX-Ring Heavy Duty Black Drive Chain

Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. RK XSO Series: Designed for Basic Motorcy...

RK 520-116L ZXW XW-Ring Super Heavy Duty Gold Drive Chain

RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...

38 Tooth Rear Sprocket JTR897-38

Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...

48.5mm x 46.5mm x 20mm x 1mm Inner Slide Fork Bushings

Upper or Lower depending on whether standard or USD forks. Outer diameter 48.5mm. Inner diameter 46.5mm. Width 20mm. Thickness 1mm.

40 Tooth Rear Sprocket JTR897-40

Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...

RK 520H-116L Heavy Duty Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...

DID 520VX3-116L Heavy Duty X-Ring Drive Chain

The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...

29mm x 50.25mm x 15mm Steering Head Bearing

Inner diameter 29mm. Outer diameter 50.25mm. Width 15mm.

29mm x 50.25mm x 15mm Steering Head Bearing

Inner diameter 29mm. Outer diameter 50.25mm. Width 15mm.

25mm Sprocket Retaining Circlips

RK 520-116L XSO2 RX-Ring Heavy Duty Gold Drive Chain

Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...