Please compare the length and shape with your original lever before ordering, as some models list both short (with return spring & sprin...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan.
Thread 8mm. Spanner size 12mm.
Pressure 2.0 Bar (29 PSI). Outer diameter: 48mm. Note: Option 1.8 Bar (26 PSI) use our SKU: 036780. Universal fit for KTM, Husqvarna, Husabe...
Outer diameter 45mm. Inner diameter 32mm. Width 7mm.
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the front wheel and two for the rear wheel. Koyo: 6005DDU, 6005-2RS-...
Koyo: 6906DDU, 6906-2RS-C3. Double sided rubber sealed. Outer diameter: 47mm. Inner diameter: 30mm. Width: 9mm. Made in Japan. Replacement a...
Outer diameter 24mm. Inner diameter 14mm. Width 6mm.
This will suit the following models as well as those listed in fitments: Husaberg TE125 2013. Husaberg TE250 2013-14. Husaberg TE300 2013-14...
Equivalent to Twin Air 154115. This will suit the following models as well as those listed in fitments: Husaberg TE125 2013. Husaberg TE250 ...
Outer diameter 30mm. Inner diameter 19mm. Width 7mm.
Note: In Black. Brembo Style. Front brake lever with spring. Polished Alloy version use our SKU: 037004. Cold-Forged Alloy version (superior...
Brembo Style. Front brake lever with spring. Black Alloy version use our SKU: 034454. Cold-Forged Alloy version (superior strength) use our ...
Cold-Forged Alloy Brake Lever – Precision Under Pressure. Brembo Style. Front brake lever with spring. Black Alloy version use our SKU: 03...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...
NOTE: This switch is not supplied with a model-specific moulded plug. It has male spade terminals fitted and matching female terminals inclu...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. Standard 2.5mm copper core centre...
