Height 69mm. Width 41mm. Replacement for Hiflofiltro HF155, Champion X320. This filter does not come with an O-ring. This will suit the foll...
Brand: JT Sprockets. Position: Rear. Tooth Count: 38. JT Part Number: JTR897.38. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR897.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR897.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter 134.5mm. Thickness 1mm. Number of pegs 24.
VD05F-B (8052). Fits NGK D series plugs with threaded terminals. 120 degree elbow long type. 10-12mm. 5 kilo ohm. Terminal stud. Red version...
As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine w...
Steel sprocket. Replaces JT Sprockets JTF1901-15.
12V 6.5AH 100 CCA. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 114mm x Width: 70mm x ...
Equivalent to VD05F-B (8052). Fits NGK D series plugs with threaded terminals. 120 degree elbow long type. 10-12mm. 5 kilo ohm. Terminal stu...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm ga...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF1901.15. Type: Standard. Material: Steel. Fitment: Direct replacem...
Replacement aftermarket part for the following OEM numbers: KTM 590.38.046.000, 590.38.046.100, 590.38.046.101, 590.38.046.144. This will su...
Height 52mm. Width 41mm. Replacement for Hiflofiltro HF157, Champion X335. This filter does not come with an O-ring. This will suit the foll...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Upper or Lower depending on whether standard or USD forks. Outer diameter 48.8mm. Inner diameter 46.8mm. Width 20mm. Thickness 1mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 29mm x OD 50.25mm x Thickness 15mm. Bearing 2: ID 29mm x OD 50.25mm x...
Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...
Upper or Lower depending on whether standard or USD forks. Outer diameter 48.5mm. Inner diameter 46.5mm. Width 20mm. Thickness 1mm.
This will suit the following models as well as those listed in fitments: KTM 400 EXC 2006-07. KTM 400 LC-4 (3 Hole Air Filter) 2001-04. KTM ...
Inner diameter 29mm. Outer diameter 50.25mm. Width 15mm.
Outer diameter 17.70mm. Length 43.00mm. Thickness 2.50mm. Heavy duty clutch springs.
Teeth: 48. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...
Please Note: This oil filter does not come with O-rings. 69mm. Replacement for Hiflofiltro HF155, Champion X320. This will suit the followin...
VD05F-R (8376) . Fits NGK D series plugs with threaded terminals. 120 degree elbow long type. 10-12mm. 5 kilo ohm. Terminal stud. Black vers...
