Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...
Please compare the length and shape with your original lever before ordering, as some models list both short (with return spring & sprin...
Lightweight chain designed for off-road racing and ATV. Low friction Z-rings oil seal for maximum performance and durability. Works Racing P...
Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan.
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Thread 8mm. Spanner size 12mm.
Ideal chain for motocross and enduro use where clearance may be limited around chain guides, sprocket retainers or crankcases. MXU UW-Ring C...
Outer diameter 45mm. Inner diameter 32mm. Width 7mm.
Inner diameter 48mm. Outer diameter 58mm. Thickness 11.5mm.
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the front wheel and two for the rear wheel. Koyo: 6005DDU, 6005-2RS-...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 48mm x OD 57.8mm x Thickness 9.5mm. Push-in type fork du...
Inner diameter 48mm. Outer diameter 57.8mm. Thickness 9.5mm.
Outer diameter 47mm. Inner diameter 35mm. Width 7mm.
Outer diameter 24mm. Inner diameter 14mm. Width 6mm.
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the rear wheel sprocket carrier. Koyo: 6906DDU, 6906-2RS-C3. Double ...
Brand cross reference: OEM245, 368, SBS 791, Ferodo FDB2165, Dunlopad DP935, Vesrah VD997, Galfer FD291. You may need more than a single pai...
Upper or Lower depending on whether standard or USD forks. Outer diameter 52mm. Inner diameter 48.1mm. Width 20mm. Thickness 1.95mm.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Koyo 6201. Outer diameter 32mm. Inner diameter 12mm. Width 10mm. Made in Japan.
Brand cross reference: 406. You may need more than a single pair of pads if you have twin discs. The GP series is optimal for road racing. I...
Outer diameter 18mm. Inner diameter 10mm. Width 4mm.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Brand cross reference: 368, SBS 791, FDB 2165, DP 935, VD 997. You may need more than a single pair of pads if you have twin discs. Develope...
