KTM EXC125 Enduro (USD Forks) 2011 Parts

M10 (10mm) x 1.00mm Banjo Bolt Brake Light Switch (Universal)

NOTE: This switch is not supplied with a model-specific moulded plug. It has male spade terminals fitted and matching female terminals inclu...

Engine Gasket Set - 010718

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

NGK BR9ECMIX Spark Plug (Japan)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. Low angle ground electrode. Compa...

NGK R6918B-8 Racing Spark Plug (Japan)

Thread 14mm x reach 19mm x hex 20.8mm. Spark plugs used for racing must withstand especially hard stresses. The speeds during a race are fre...

48.8mm x 46.8mm x 20mm x 1mm Inner Slide Fork Bushings

Upper or Lower depending on whether standard or USD forks. Outer diameter 48.8mm. Inner diameter 46.8mm. Width 20mm. Thickness 1mm.

Steering Head Taper Bearing Kit SST901 (Japanese)

Made in Japan. This kit includes the following bearings: Bearing 1: ID 29mm x OD 50.25mm x Thickness 15mm. Bearing 2: ID 29mm x OD 50.25mm x...

52mm x 48.1mm x 12mm x 1.95mm Outer Guide Fork Bushings

Upper or Lower depending on whether standard or USD forks. Outer diameter 52mm. Inner diameter 48.1mm. Width 12mm. Thickness 1.95mm.

38 Tooth Rear Sprocket JTR897-38

Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...

40 Tooth Rear Sprocket JTR897-40

Steel sprocket. ID: 125mm. PCD (Pitch Circle Diameter): 150mm. Bolt hole OD: 8.5mm. Number of bolt holes: 6. Pitch: 520. Indent: N/A. Replac...

48.5mm x 46.5mm x 20mm x 1mm Inner Slide Fork Bushings

Upper or Lower depending on whether standard or USD forks. Outer diameter 48.5mm. Inner diameter 46.5mm. Width 20mm. Thickness 1mm.

29mm x 50.25mm x 15mm Steering Head Bearing

Inner diameter 29mm. Outer diameter 50.25mm. Width 15mm.

29mm x 50.25mm x 15mm Steering Head Bearing

Inner diameter 29mm. Outer diameter 50.25mm. Width 15mm.

25mm Sprocket Retaining Circlips

MTX Zero Aluminium 897-48 Rear Sprocket in Black

Teeth: 48. Pitch: 520. Inner diameter: 125mm. Bolt hole diameter: 8.5mm. Centre-to-centre distance between bolt holes: 150mm. CNC machined f...