Pair of ignition barrels and 2 keys included. Barrel outer diameter 15.00mm.
66mm between bolt hole centres. 5 wires. Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show ...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. Standard 2...
Made in Japan. Terminals: 6. Replacement aftermarket part for the following OEM numbers: Kawasaki 21066-0732, 21066-0712. and many more TBA....
Thread 14mm x reach 19mm x hex 20.8mm. Spark plugs used for racing must withstand especially hard stresses. The speeds during a race are fre...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. Low angle ground electrode. Compa...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 31600-MEN-A31. and many more TBA. Regulator/Rectifier Fitti...
10 wires with female spade block and bullet connectors. 2 keys included.
2 wires with male spade block connector. 2 keys included.
Replacement aftermarket part for Husqvarna, Husaberg and KTM OEM 60011034100. Made in Japan to OE specification. This suits the following KT...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 2 ground ele...
4 wires with female spade block connector. 2 keys included.
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm gap.
73mm between bolt hole centres. Flange thickness: 20mm. 7 wires. Length of wiring not including connectors: 500mm. Replacement aftermarket p...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 10. Reach 19mm (3/4"). Fine wire nickel alloy centre electrode. 0.7-0.8mm gap....
2 wires with male spade block connector. Includes ignition switch, fuel cap, seat lock and 2 keys.
Thread 14mm x hex 13/16" x pitch 1.25mm. Projected insulator. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre e...
80mm between bolt hole centres. 8 wires. Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show ...
High-quality chrome Fat Bob style ignition and lighting switch for Harley-Davidson Big Twin models fitted with dual fuel tanks and a tank-mo...
Made in Japan. Replacement aftermarket part for Ducati OEM 54040191A.
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Thread 14mm x hex 13/16" x pitch 1.25mm. Projected insulator. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre...
Made in Japan. Replacement aftermarket part for Honda OEM 31600-KRN-A71. and many more TBA. Regulator/Rectifier Fitting InstructionsWhen on ...
4 wires with male spade block connector. 2 keys included.
Thread 14mm x hex 13/16" x pitch 1.25mm. Projected insulator. Heat range 6. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre...
4 wires with male and female spade block connectors. 2 keys included.
Premium iridium electrode. Thread 14mm x reach 19mm x hex 13/16". Gasket seat type. Ceramic resistor. Heat range 5. 1.1mm (0.044")...
4 wires. SH712AA. Made in Japan. Replacement aftermarket part for Yamaha OEM 5TJ-81960-02, 5TJ-81960-00, 5TJ-81960-01, 5TJ-81960-80. Regulat...
6 wires with male block connector and female spades. 2 keys included.
Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine ...
