12 volt 2.5AH 20 CCA. Length: 80mm x Width: 70mm x Height: 105mm. Replaces: CB2.5L-C, YB2.5L-C, 31500-166-672, 31500-166-506AH, YUAM225LC. P...
Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine ...
12v Silicon 2 Pin Rectifier. Made in Japan. Replacement aftermarket part for Honda OEM 31700-124-003, 31700-124-008, 31700-HM5-630, 31700-KE...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 19mm (3/4") reach. Standard 2.5...
5 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is run...
7 wires with female spade block and bullet connectors. 2 keys included.
Replacement aftermarket part for Piaggio, Aprilia OEM AP8124267. Replaces SH541G-12, SH5412G-12. Regulator/Rectifier Fitting InstructionsWhe...
68mm between bolt hole centres. 5 wires. Each cable are approx 150mm. Made in Asia. Replacement aftermarket part for the following OEM numbe...
12V 12AH. Absorbed Glass Mat Technology. The perfect battery for Motorcycles, ATV's, Personal Watercraft and Snowmobiles. Maintenance free n...
2 wires with male spade block connector. 2 keys included.
68mm between bolt hole centres. 7 wires. Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show ...
5 wires with male spade block connector. 2 keys included.
6 wires with female spade block and bullet connectors. 2 keys included. Replacement aftermarket part for Honda OEM 35100-KY2-701, 35100-KT8-...
Single bolt mounting. 5 pins. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. W...
8 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is run...
Replacement aftermarket part for Husqvarna, Husaberg and KTM OEM 60011034100. Made in Japan to OE specification. This suits the following KT...
73mm between bolt hole centres. Flange thickness: 20mm. 7 wires. Length of wiring not including connectors: 500mm. Replacement aftermarket p...
55mm between bolt hole centres. 4 wires. Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show ...
7 wires - 3 x yellow, 2 x red and 2 x green. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output o...
Replacement aftermarket part for Yamaha OEM 5FL-81960-00, 5KP-81960-00. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batter...
Note: this is an ignition barrel switch with 6 wires that fits some models of the Suzuki GS125. Many models have just 4 wires which is our S...
Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is running this...
69mm between bolt hole centres. 4 pins. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13....
Harley Davidson 6 pole type. For bracket search 006589. 2 keys included.
4 wires with male spade block connector. 2 keys included.
12 volts. 5 wires - green, red, pink, yellow and black. Single male block connector. 55mm centre to centre mounting holes . Regulator/Rectif...
4 wires with male bullet block and female spade connectors. Includes ignition switch, fuel cap, seat lock and 2 keys.
