Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 19mm (3/4") reach. Standard 2.5...
5 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is run...
7 wires with female spade block and bullet connectors. 2 keys included.
Replacement aftermarket part for Piaggio, Aprilia OEM AP8124267. Replaces SH541G-12, SH5412G-12. Regulator/Rectifier Fitting InstructionsWhe...
68mm between bolt hole centres. 5 wires. Each cable are approx 150mm. Made in Asia. Replacement aftermarket part for the following OEM numbe...
Brand update notice: US Powersports batteries are in the process of being re‑branded as MTX. While existing US Powersports branded stock r...
Single bolt mounting. 5 pins. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. W...
12V 12AH. Absorbed Glass Mat Technology. The perfect battery for Motorcycles, ATV's, Personal Watercraft and Snowmobiles. Maintenance free n...
2 wires with male spade block connector. 2 keys included.
6 wires with female spade block and bullet connectors. 2 keys included. Replacement aftermarket part for Honda OEM 35100-KY2-701, 35100-KT8-...
68mm between bolt hole centres. 7 wires. Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show ...
8 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is run...
5 wires with male spade block connector. 2 keys included.
Replacement aftermarket part for Yamaha OEM 5FL-81960-00, 5KP-81960-00. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batter...
55mm between bolt hole centres. 4 wires. Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show ...
Replacement aftermarket part for Husqvarna, Husaberg and KTM OEM 60011034100. Made in Japan to OE specification. This suits the following KT...
7 wires - 3 x yellow, 2 x red and 2 x green. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output o...
Note: this is an ignition barrel switch with 6 wires that fits some models of the Suzuki GS125. Many models have just 4 wires which is our S...
73mm between bolt hole centres. Flange thickness: 20mm. 7 wires. Length of wiring not including connectors: 500mm. Replacement aftermarket p...
Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is running this...
Harley Davidson 6 pole type. For bracket search 006589. 2 keys included.
69mm between bolt hole centres. 4 pins. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13....
4 wires with male bullet block and female spade connectors. Includes ignition switch, fuel cap, seat lock and 2 keys.
Replacement aftermarket part for Honda OEM 31600-MAA. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an...
4 wires with male spade block connector. 2 keys included.
Made in Japan. Replacement aftermarket part for KTM OEM 80011034000.
5 wires with male spade block and bullet connectors. 2 keys included.
