68mm between bolt hole centres. 5 wires. Each cable are approx 150mm. Made in Asia. Replacement aftermarket part for the following OEM numbe...
Replacement aftermarket part for Piaggio, Aprilia OEM AP8124267. Replaces SH541G-12, SH5412G-12. Regulator/Rectifier Fitting InstructionsWhe...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 6. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...
5 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is run...
Replacement aftermarket part for Yamaha OEM 5FL-81960-00, 5KP-81960-00. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batter...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.7-0.8mm gap. Genuine NGK spark ...
7 wires with female spade block and bullet connectors. 2 keys included.
Brand update notice: US Powersports batteries are in the process of being re‑branded as MTX. While existing US Powersports branded stock r...
2 wires with male spade block connector. 2 keys included.
8 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is run...
55mm between bolt hole centres. 4 wires. Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show ...
5 wires with male spade block connector. 2 keys included.
6 wires with female spade block and bullet connectors. 2 keys included. Replacement aftermarket part for Honda OEM 35100-KY2-701, 35100-KT8-...
7 wires - 3 x yellow, 2 x red and 2 x green. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output o...
6 wires with male spade block connector. 2 keys included.
Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is running this...
Note: this is an ignition barrel switch with 6 wires that fits some models of the Suzuki GS125. Many models have just 4 wires which is our S...
LMAR9AI-8 has been superseded by NGK to LMAR9AI-8D. NGK OEM 97225 superseded to 90526. Thread Diameter: 10mm. Thread Pitch: 1.0mm. Seat Type...
80mm between bolt hole centres. 8 wires. Made in Japan. Replacement aftermarket part for Honda OEM 31600-MAT-E01. Regulator/Rectifier Fittin...
4 wires with male spade block connector. 2 keys included.
69mm between bolt hole centres. 4 pins. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13....
5 wires with male spade block and bullet connectors. 2 keys included.
60mm between bolt hole centres. 6 pins. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13....
4 wires with male bullet block and female spade connectors. Includes ignition switch, fuel cap, seat lock and 2 keys.
Made in Japan. Replacement aftermarket part for KTM OEM 80011034000.
Universal 6v/12v rectifier. Alloy body. Single bolt mounting (not included). 2 wires. This can be used in place of the OEM numbers below alt...
