Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.6mm fine w...
Replacement aftermarket part for Honda OEM 31600-MAA. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an...
5 wires with male spade block and bullet connectors. 2 keys included.
Made in Japan. Replacement aftermarket part for KTM OEM 80011034000.
4 wires with block and bullet connectors. Includes ignition switch, seat lock, glove box lock and 2 keys.
80mm between bolt hole centres. 8 wires. Made in Japan. Replacement aftermarket part for Honda OEM 31600-MAT-E01. Regulator/Rectifier Fittin...
2 wires. 2 keys included.
7 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is run...
Universal 6v/12v rectifier. Alloy body. Single bolt mounting (not included). 2 wires. This can be used in place of the OEM numbers below alt...
60mm between bolt hole centres. 6 pins. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13....
2 wires with male spade block connector. 2 keys included. Replacement aftermarket part for Yamaha OEM 5LP-82510-00, 5LP-82510-01-00.
6 wires with male bullet block and female spade connectors. Includes ignition switch, fuel cap, seat lock and 2 keys.
6 wires with male spade block connectors (with loop). Includes ignition switch, glove box lock and 2 keys.
Replacement aftermarket part for Honda OEM 31600-MCG-000. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should sho...
4 wires with female bullet block connector. Includes ignition switch, seat lock, battery lock and 2 keys.
6 wires. Replacement for Aprilia, Piaggio OE AP8112434, AP8112906. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries s...
5 wires with male spade block connector. 2 keys included.
Replacement aftermarket part for Honda OEM 31400-300-035, 31700-333-008. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batte...
6 wires with block connector. 2 keys included.
55mm between bolt hole centres. 6 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13...
73mm between bolt hole centres. 5 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13...
Aftermarket part for following OEM numbers 3GF-H1960-00-00 0450553 045206. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt bat...
3 wires. 2 keys included.
Replacement aftermarket part for Yamaha OEM 1D4-H3598-00. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should sho...
Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is running this...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. Low angle ground electrode. 0.7-0...
8 wires. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is run...
Single bolt mounting. 3 pins. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show an output of 13.2 Volts. W...
