Straight TR4 valve.
If you're working on a vintage or classic motorcycle and the original air filter isn’t available anymore, our foam air filter sheets can b...
Includes 3 types of head gasket.
Brand cross reference: Vesrah VD254, VD925; 115; Ferodo FRP405; SBS 559. You may need more than a single pair of pads if you have twin discs...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Inner diameter 36mm. Outer diameter 48mm. Thickness 13.5mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 92093-1181,...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 36mm x OD 48mm x Thickness 10.5mm. Push-in type fork dus...
Outer diameter 35mm. Inner diameter 17mm. Width 8mm.
Straight TR6 valve.
Koyo 6303. Outer diameter 47mm. Inner diameter 17mm. Width 14mm. Made in Japan.
Outer diameter 35mm. Inner diameter 24mm. Width 7mm.
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Inner diameter: 32mm. Outer diameter: 43mm. Thickness: 10.5mm. This will suit the following models as well as those listed in fitments: Derb...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Replacement aftermarket part for the following OEM numbers: Derbi, Gilera, Piaggio, Vespa 00F00901291, 00H00902291, ODN00F00901291, ODN00F00...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Steel sprocket. Replaces JT Sprockets JTF591-11.
Steel sprocket. Replaces JT Sprockets JTR996-52.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. Standard 2.5mm copper core centre...
Brand: JT Sprockets. Position: Rear. Tooth Count: 52. JT Part Number: JTR1131.52. Type: Standard. Material: Steel. Fitment: Direct replaceme...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 43.00mm. Gudgeon pi...
Brass outlets.
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 42.00mm. Gudgeon pi...
