Due to new lock down, we are extremely busy and will take extra time to answer you, please be patient

MTX 520HD-110 Gold Heavy Duty Drive Chain

£13.46Includes 20% VAT
In Stock
Manufacturer: MTX
Pack size: Each
SKU: 002405


MTX 520HD-110 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets.

This may not be the most suitable grade of final drive (roller) chain for your motorcycle so, select only the correct grade recommended in your workshop manual.

Most all classic British, small Japanese, mopeds, MX and large classic Japanese bikes take a non-O-ring chain, the large modern machines will require an O or X-Ring

  • If you have odd sprockets with fewer or more teeth than standard you will have to select equivalent pitch and suitable length from our drive chain category. Always select a longer chain if in doubt, you can then cut it down with one of our chain tools, its not so simple to add links if its too short!
  • Typically adding two teeth to the rear sprocket equals the same as dropping one tooth on the front which means you can still use the standard length of chain whichever way you choose. We would however, advise on not using a smaller than standard front sprocket. On a smaller sprocket, the drive chain must turn a tighter radius, which increases friction and decreases the life expectancy of the chain
  • Our drive sprockets are listed for example (Front 14T) or (Rear 48T). These are non-standard sprockets and the 14T or 48T stands for the number of teeth. If a sprocket is simply marked (Front Standard) or (Rear Standard), this means that these are the factory fitted sprockets with the original number of teeth
  • Always go up or down in even numbers of teeth, as odd numbers will make selecting the length of chain to suit, more difficult

Chain Type Guide

  • Standard chain is a regular chain used on smaller bikes
  • Heavy Duty is mostly aimed for midsized road bikes, most MX bikes can run on HD chain
  • O-ring is a sealed chain mainly used on large road bikes. It's also used on some MX bikes, especially for Enduro use as they retain lubrication better than HD chains
  • X-ring is a step up from O-ring, they hold lubrication even longer therefore providing less friction and will last longer when compared to a matching brand. An X-ring seal has two lips to seal, to keep lube in and dirt out as it sits flat, it seals better than the O-ring seal
  • The life of O-ring chain is usually determined by the durability of the O-ring. To improve the durability, there should be an oil film on the O-rings at all times. Even though it is a sealed chain, lubrication is required to extend its working life
  • However, make no mistake, a more expensive O-ring chain can easily out last a cheaper X-ring chain
Before You Place Your Order...
  1. Note the image may not be exactly as item received and any slight difference will not be inferior or effect performance
  2. Check the fitment list to ensure this item will fit your vehicle
  3. When we refer to right or left, this is as you sit on your vehicle
  4. To find part by SKU, enter the number without "SKU" into the search box
  5. Products containing any fluid or hazardous materials, aerosols, batteries including large lithium jump starters cannot be shipped overseas due to courier restrictions although we can ship UK offshore and Scottish Highlands at higher shipping rates
  6. EU customers should check with your countries customs office to determine what additional costs such as tax or Import duties will be prior to purchasing. These charges are normally collected by the delivery company or when you pick the item up, they are not included in the item price or shipping charge on this website

All parts and accessories are brand new and include VAT where applicable.
Most parts are pattern or aftermarket although some will be genuine but are not always stated as being so.
The use of motorcycle manufacturers' names is for reference purposes only. We do not imply that the products we sell are made by or with the permission of the names listed.

ETX125 1998-01
Pegaso 650 1992-00
Pegaso 650 Factory 2007-09
Pegaso 650 ie 2001-04
Pegaso 650 Strada 2005-09
Pegaso 650 Trail 2006-08
Red Rose 125 1996-99
Red Rose 125 Custom 1991-95
Red Rose 125 Custom AE 1988-90
RS125 2006-10
RS250 1995-03
ST125 1983
STX125 1984
Tuareg 125 Freno Disco 1987
Tuareg 125 Rally 1989
Tuareg 250 Rally 1985-89
F650 1993-99
F650 GS (Non-ABS) 1999
F650 ST Strada 1996-00
Excaliber 501 RLX 1987-92
T4 ER350 1987-91, 1998-02
T4 ER500 1987-90
W12 350 1993-95
R1 125 1988-89
CB250 F Hornet (MC31) 1996-01
CR125 R (Not Elsinore) 1979-81
CRF230 F 2003-14
CRM250 AR (MD32) 1998
CRM250 R 1993-96
FMX650 2005-06
NSR125 R 1999-01
NSR250 R2/R3 (MC28) 1994, 1996
NSR250 R3 (MC28) 1995
NX500 Dominator 1991-99
NX650 Dominator 1992-99
SLR650 1997-98
VT250 C Magna 1994-97
XL125 V Varadero 2001-11
XR600 R 1985-87, 1991-99
XR650 L 1993-12
XR650 R 2000-07
SM510 R 2005-10
WR125 1983-87
EN500 C Vulcan LTD 1996-09
KDX200 E 1989-94
KDX250 A 1980
KDX250 B 1981
KLE500 A 1997-03
KLE500 B 2005-07
KLX250 R D 1993-96
KLX300 R A 1997-07
KLX650 R A 1993-95
KLX650 R D 1996, 1999
KX125 D 1985
KX125 K 1994-95
KX125 L 1999-02
KX125 M 2003
ZR250 A1 Balius 1991
ZR250 A2 Balius 1992
ZR250 A3 Balius 1993
ZR250 A4 Balius 1994
ZR250 A5 Balius 1995
ZR250 A6 Balius 1996
ZR400 G Zephyr 1996
ZX-6R Ninja (ZX636C) 2005-06
ZX-6R Ninja (ZX636D) 2006
ZX-6RR Ninja (ZX600N) 2005-06
ZXR250 (ZX250-A) 1991
ZXR250 (ZX250-A1) 1989
ZXR250 (ZX250-A2) 1990
ZXR250 (ZX250-C1) 1991
ZXR250 (ZX250-C2) 1992
ZXR250 (ZX250-C3) 1993
ZXR250 R (ZX250-B1) 1989
ZXR250 R (ZX250-B2) 1990
ZXR250 R (ZX250-D1) 1991
ZXR400 (ZX400-H2) 1990
ZXR400 (ZX400-L1) 1991
ZXR400 (ZX400-L2) 1992
ZXR400 (ZX400-L3) 1993
ZXR400 (ZX400-L4) 1994
ZXR400 (ZX400-L5) 1995
ZXR400 (ZX400-L6) 1996
ZXR400 (ZX400-L7) 1997
ZXR400 (ZX400-L8) 1998
ZXR400 (ZX400-L9) 1999
125 EXC Enduro 1989, 1991-93
125 EXC Enduro (Std Forks) 1994
Venox 250 (Carb) 2000-06
Venox 250 (EFI) 2000-10
Mastiff 660 (17" Front/Cast Wheel) 1999-05
Mastiff 660 (21" Front/Spoke Wheel) 1997-05
DR-Z400 SM 2005-12
DR350 1990-99
DR350 SE 1994-95, 1999
GS500 2001-08
GS500 E 1999-00
GS500 F 2004-10
GSX250 E 1982-83
PE175 1982
PE250 1980-81
RG250 F Gamma Mk2 1985
RG250 F Gamma Mk3 1986-87
RG250 W Gamma Mk1 1983-84
RM400 1979-80
TU250 X 1997-01
FZ400 Fazer 1997
RZ250 R 1986-87
SZR660 1995-97
TT600 E Belgarda (Electric Start) 1996-98
TZR250 1986
TZR250 (2MA/2XW/1KT/2AW) 1987-89
TZR250 (3MA) 1989-90
TZR250 SP (3MA) 1990
XJ600 N Diversion (Naked) (4KE) 1994-02
XJ600 N Diversion (Naked) (4MB) 1998-99
XJ600 S Diversion (Half Faired) 1992-02
XJR400 1993-96
XJR400 R 1995-07
XJR400 R2 1996
XT660 R 2004-11
XT660 X Supermoto 2004-11
XT660 Z Tenere 2008-12
XTZ660 Tenere 1991-96
YZ250 (2T) 1981

You May Also Like

68mm x 37mm Rear Sprocket Rubbers
Pack size: Set of 4 SKU: 002974


View Details
15 Tooth Front Sprocket - 003385
Pack size: Each SKU: 003385


View Details
63HV304-52A Primary Chain
Pack size: Each SKU: 002795


View Details
Chrome Rear Sprocket Cover
Pack size: Each SKU: 002858


View Details
16.5mm x 8.1mm x 748mm Drive Belt
Pack size: Each SKU: 002000


View Details
Front Sprocket Retainer - 002929
Pack size: Each SKU: 002929


View Details
63HV306-46 Secondary Chain
Pack size: Each SKU: 002807


View Details
TVH 520-114 Gold X-Ring Drive Chain
Pack size: Each SKU: 002439


View Details


Trustpilot 5 stars
Rated 4.9 out of 5 based on 3,700 reviews on
Trustpilot brandmark