Aftermarket black resistor spark plug cap, equivalent to NGK LB05F and designed for use with 14mm spark plugs that have an exposed threaded ...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm ga...
Brass outlets.
45mm between bolt hole centres.
Impeller length: 57mm. Oil seal: OD 16mm x ID 10mm x W 8mm. Bearing: Koyo 608DDU (OD 22mm x ID 8mm x W 7mm). Kit includes 2 bearings.
Width 18.5mm. Depth 9mm. Outer length 814mm.
Outer diameter 17mm. Inner diameter 12mm. Length 14mm.
Outer diameter 41.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Outer diameter 40.75mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Includes top end gaskets.
Bore size 40.50mm. Gudgeon pin outer diameter 12mm. Crown height 20mm. Piston length 52mm. Ring peg position 23.5mm. 2 stroke. Without ports...
Bore size 47.50mm. Gudgeon pin outer diameter 12mm. Crown height 20mm. Piston length 52mm. Ring peg position 23.5mm. 2 stroke. Without ports...
Bore size 48.00mm. Gudgeon pin outer diameter 12mm. Crown height 20mm. Piston length 52mm. Ring peg position 23.5mm. 2 stroke. Without ports...
Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
12 volt 3AH 50 CCA. Length: 114mm x Width: 70mm x Height: 85mm. Replaces: 12N4-3B, 12VX4L-B, 503014003, CT4L-BS, CTX4L-BS, ENTX4L-BS, GT4L-B...
