Home
Honda
CBR250
RR (MC22) 1992
Regulator Rectifiers
Regulator Rectifier 31600-MV4-010 31600-KBG-008 8000B0563 SH69312

Regulator Rectifier 31600-MV4-010 31600-KBG-008 8000B0563 SH69312

£39.05

Includes 20% VAT

Out of Stock

We cannot say when this item will be back in stock due to global events beyond our control.

This product fits the Honda CBR250 RR (MC22) 1992 model.

Pack size: Each

SKU: 006097

60mm between bolt hole centres
5 pins
Replaces Shindengen SH693-12 SH633-12 SH638-12
Made in China

Replacement aftermarket part for the following OEM numbers:

Honda 31600-KBG-008, 31600-KFG-860, 31600-KFG-861, 31600-KFG-862, 31600-KGB-901, 31600-KPJ-670, 31600-KW6-841, 31600-KY2-701, 31600-KY2-702, 31600-KY2-703, 31600-MV4-000, 31600-MV4-010
Husqvarna 8000B0563
and many more TBA

This will suit the following models as well as those listed in fitments:

Husqvarna WRE 125 2011-2013
Husqvarna SMS 125 2011-2013
Husqvarna TE 250 2008-2012
Husqvarna TXC 250 2008-2012
Husqvarna TE 310 2011-12
Husqvarna TXC 310 2011-2012
Husqvarna SMT 450 2008-10
Husqvarna SMT 510 2008-10

Regulator/Rectifier Fitting Instructions

When on test, 12 Volt batteries should show an output of 13.2 Volts. When the engine is running this would increase to between 14 and 15 Volts.
Yamaha and certain Honda motorcycle's use a three-phase type system, with a permanent magnet instead of an electromagnet, to regulate the current from the alternator.
Rather than controlling the output from the alternator, the excess voltage would be dumped by means of heat transfer.
To improve the transfer of heat from the regulator/rectifier you can use a silicone heat sink compound which is placed on the back of the regulator/rectifier and on the mounting point. Both surfaces must be clean for better contact and heat transference.
Also, to improve the earth of the regulator/rectifier, a cable can be introduced on one of the mounting bolts and connected directly to the negative terminal of the battery (earth side). This would eliminate the unreliable arrangement of earth fittings that are connected to various parts of the frame or motorcycle that does not always work. This type of earth is used as standard on some Yamaha and Honda motorcycles.

Before You Place Your Order...

Note the image may not be exactly as item received and any slight difference will not be inferior or effect performance
Check the fitment list to ensure this item will fit your vehicle
When we refer to right or left, this is as you sit on your vehicle
To find part by SKU, enter the number without "SKU" into the search box
Products containing any fluid or hazardous materials, aerosols, batteries including large lithium jump starters cannot be shipped overseas due to courier restrictions although we can ship UK offshore and Scottish Highlands at higher shipping rates
EU customers should check with your countries customs office to determine what additional costs such as tax or Import duties will be prior to purchasing. These charges are normally collected by the delivery company or when you pick the item up, they are not included in the item price or shipping charge on this website

All parts and accessories are brand new and include VAT where applicable.
Most parts are pattern or aftermarket although some will be genuine but are not always stated as being so.
The use of motorcycle manufacturers' names is for reference purposes only. We do not imply that the products we sell are made by or with the permission of the names listed.