This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Aftermarket black resistor spark plug cap, equivalent to NGK LB05F and designed for use with 14mm spark plugs that have an exposed threaded ...
Brake light switch with 820mm lead length. Replacement aftermarket part for the following OEM numbers: Suzuki 57460-49100, 57460-45500, 5746...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Brake light switch with lead. 2 wires with bullet connectors.
For use with bulbs up to 10 watt.
Steel sprocket. Replaces JT Sprockets JTF425-16.
Steel sprocket. Replaces JT Sprockets JTF425-14.
Steel sprocket. Replaces JT Sprockets JTF425-15.
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF425.17. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine...
Outer diameter (including teeth) 111mm. Thickness 3mm. Number of pegs 12. Replacement for Vesrah VP3021.
Outer diameter 100mm. Thickness 1.6mm. Number of pegs 26.
Outer diameter 40mm. Inner diameter 25mm. Width 8mm.
Thread 14mm x hex 13/16" x pitch 1.25mm. Projected insulator. Heat range 6. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Outer diameter 110mm. Replacement aftermarket part for Suzuki OEM 64651-01001.
Outer diameter 44mm. Inner diameter 34.5mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylin...
Outer diameter 44mm. Inner diameter 35mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Width 4" (100mm) at widest point. Length 27" (685mm).
