Outer diameter 16mm. Inner diameter 5.5mm. Width 8mm.
Genuine NGK LB05F black resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
Outer length: 985mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Additional fittings info: adjuster is loose. I...
Outer diameter 44mm. Inner diameter 25mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Suzuki 09283-25066. and man...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Koyo 6304NR. Deep groove ball bearing with snap ring groove. Outer diameter 52mm. Inner diameter 20mm. Width 15mm. Made in Japan. Replacemen...
Replacement for FEW D77, DN61, Suzuki OE 32240-43012.
Steel sprocket. Replaces JT Sprockets JTF563-14.
Steel sprocket. Replaces JT Sprockets JTR801-37.
Aftermarket black resistor spark plug cap, equivalent to NGK LB05F and designed for use with 14mm spark plugs that have an exposed threaded ...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF563.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
For use with bulbs up to 10 watt.
Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR801.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR801.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR801.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter 40mm. Inner diameter 20mm. Width 7mm.
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR801.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 32. JT Part Number: JTR801.32. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Outer diameter (including teeth) 111mm. Thickness 3mm. Number of pegs 12. Replacement for Vesrah VP3021.
Outer diameter 100mm. Thickness 1.6mm. Number of pegs 26.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 43.00mm. Gudgeon pi...
