Suitable for motorcycles up to 200cc. 320mm centre to centre of bolt holes. Top pin hole ID 12mm - width 18mm. Bottom pin hole ID 12mm - wid...
31mm between hook centres. Thickness 6mm to 8.75mm.
Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Straight TR4 valve.
Suitable for motorcycles up to 200cc. Chrome body and spring. 320mm centre to centre of bolt holes. Top pin hole ID 12mm - width 18mm. Botto...
Outer diameter 130mm. Width 28mm. Brake shoe springs for these are SKU: 001877. How to measure drum brake shoes: Outer Dimension: Preferably...
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
Koyo 6304. Outer diameter 52mm. Inner diameter 20mm. Width 15mm. Made in Japan.
Koyo: 6201DDU, 6201-2RS-C3. Double sided rubber sealed. Outer diameter 32mm. Inner diameter 12mm. Width 10mm. Made in Japan. Replacement aft...
Both mirrors have right hand thread. Glass outer diameter 95mm. Total outer diameter 110mm. 150mm Stem length from mirror to bend. 60mm from...
2 bolt hole type. 34mm between bolt hole centres. Replacement aftermarket part for the following OEM numbers: Honda 95014-92100, 23811-230-0...
Koyo 6203-DDU/2RS 6203-2RS-C3. For non-sealed bearing use SKU: 007534. Inner diameter 17mm. Outer diameter 40mm. Width 12mm. Made in Japan. ...
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
Inner diameter 27mm. Outer diameter 39mm. Thickness 10.5mm.
Stem length from mirror body to bend: 150mm. From bend to end of thread: 60mm. Replacement aftermarket part for the following OEM numbers:Ka...
Inner diameter 27mm. Outer diameter 39mm. Thickness 11.5mm.
Koyo 6300DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 10mm. Width 11mm. Made in Japan.
Koyo 6200DDU. Double sided rubber sealed. Outer diameter 30mm. Inner diameter 10mm. Width 9mm. Made in Japan.
Both mirrors have 10mm right-hand thread x standard pitch of 1.25mm. Glass outer diameter 95mm. Total outer diameter 105mm. 140mm stem lengt...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
These mirrors will fit any bike with an 8mm or 10mm right hand thread (clockwise) each side, left or right. Stem length: 190mm centre to cen...
Glass outer diameter 110mm. 190mm stem length from centre of mirror to bend. 50mm from bend to end of thread. E-marked. Replacement aftermar...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Length: 32" (820mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork. Replacement aftermarket part for the fo...
Length: 32" (810mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork.
