Inner diameter 30mm. Outer diameter 55mm. Width 1.5mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600063.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan. Replacement aftermarket part ...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
If you're working on a vintage or classic motorcycle and the original air filter isn’t available anymore, our foam air filter sheets can b...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Cylinder head to rocker box mounting rubber. Outer diameter 25.5mm. Inner diameter 11mm. Thickness 2mm. Replacement aftermarket part for Suz...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41.1mm. Width 11.8mm. Thickness 1.95mm. Repla...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Suitable for fork seals with 58mm outer diameter. Thickness 1.6mm. This will suit the following models as well as those listed in fitments: ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Inner diameter: 41mm. Outer diameter: 53mm. Thickness: 4.50mm/13.50mm. Replacement aftermarket part for the following OEM numbers: Yamaha 3V...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Inner diameter: 41mm. Outer diameter: 53mm. Thickness: 8mm with 9.5mm lip. Replacement aftermarket part for the following OEM numbers: Suzuk...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 53mm x Thickness 8mm x lip 9.5mm. Push-in type...
Everything you need is included in this easy to fit 12v indicator buzzer kit. Fit after the indicator relay and connect the red wire to the ...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Made in Japan. This set includes the following items: 1 x bearing OD 24mm x ID 17mm x length 26mm. 1 x shaft OD 17mm x ID 10mm x length 30mm...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter: 30mm. Outer diameter: 55mm. Width: 17mm. M...
Thread: 14mm. Pitch: 1.25mm. Length: 20mm. Plug with copper washer for the oil pan. Washer: 14mm x 19.2mm x 2.00mm. Replacement aftermarket ...
Koyo 6000. Outer diameter 26mm. Inner diameter 10mm. Width 8mm. Made in Japan.
