Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Includes the electric fuel pump and parts needed to service or rebuild the factory fuel pump module - check image/s. Works Racing Parts (WRP...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
2 bolt hole type. 42mm between bolt hole centres.
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Inner diameter 43mm. Outer diameter 54mm. Thickness 13mm.
Koyo 6203DDU. Upgraded from B6203ZC3. Double sided rubber sealed. Outer diameter: 40mm. Inner diameter: 17mm. Width; 12mm. Made in Japan. Re...
Koyo 6204-2RS-C3. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan. Replacement aftermarket p...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Upper or Lower depending on whether standard or USD forks. Outer diameter 47mm. Inner diameter 43.1mm. Width 15mm. Thickness 1.95mm. Replace...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Koyo 6000. Outer diameter 26mm. Inner diameter 10mm. Width 8mm. Made in Japan.
Non-asbestos. Outer diameter 46mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
The AX in BAX15s denotes that the pins are angled at 150 degrees, unlike BA15s (where the pins are directly opposite). Features of BAX15s. P...
Koyo 62/32-DDU/2RS 62/32-2RS-C3. Inner diameter 32mm. Outer diameter 65mm. Width 17mm. Made in Japan. Replacement aftermarket part for for t...
Upper or Lower depending on whether standard or USD forks. Outer diameter 43.6mm. Inner diameter 41.6mm. Width 15mm. Thickness 1mm.
Outer diameter: 21mm. Inner diameter: 10mm. Width: 5mm. Replacement aftermarket part for following OEM numbers: Honda 91204-HP1-601, 91204-H...