67mm between bolt hole centres. 5 wires. Each cable are approx 150mm. Made in Japan. Replacement aftermarket part for Suzuki OEM 32800-24B01...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF432.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF432.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Equivalent to VD05F-B (8052). Fits NGK D series plugs with threaded terminals. 120 degree elbow long type. 10-12mm. 5 kilo ohm. Terminal stu...
Brand: JT Sprockets. Position: Rear. Tooth Count: 53. JT Part Number: JTR808.53. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR808.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF432.12. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 44. JT Part Number: JTR808.44. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF432.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Single spade terminal. Single HT lead 250mm. Mounting centres: 55mm. Primary resistance: 0.9Ω. Secondary resistance: 7.0kΩ. Made in Japan....
Equivalent to Twin Air 153403. This will suit the following models as well as those listed in fitments: Suzuki DR250 S ER,ES,ET 1994-96. Suz...
Replacement aftermarket part for the following OEM numbers: Suzuki 16510-38240. This will suit the following models as well as those listed ...
Height 33mm. Width 60mm. Replacement for Hiflofiltro HF136, Champion X319. This filter does not come with an O-ring. This will suit the foll...
Thread 12mm x hex 18mm x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.6mm fine wire iridium ...
Thread 12mm x hex 18mm x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 9. 19mm (3/4") reach. Special design. 0.9mm (0...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Performance Upgrade: Replaces worn, damaged parts with, in many cases, upgraded materials like high-performance interface gasket material fo...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Flat head countersunk bolts. Thread 8mm. Length 28mm. Pitch 1.25mm.
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. RK XSO Series: Designed for Basic Motorcy...
Inner diameter 30mm. Outer diameter 55mm. Width 1.5mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600063.
Outer diameter 12.7mm. Length 37mm. Spring length 40mm. Replacement aftermarket part for for the following OEM numbers: Honda 43520-MJ6-315,...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
This kit includes the following bearings and two seals: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thickn...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Piston outer diameter 27mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Outer diameter 10mm. Inner diameter 7.75mm. Stem 4.5mm.
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.10mm. Width: 12mm. Thickness: 1.95mm. Re...
