Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Stem length from mirror body to bend: 150mm. From bend to end of thread: 60mm. Replacement aftermarket part for the following OEM numbers:Ka...
Both mirrors have 10mm right-hand thread x standard pitch of 1.25mm. Glass outer diameter 95mm. Total outer diameter 105mm. 140mm stem lengt...
Non-asbestos. Outer diameter 46mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
These mirrors will fit any bike with an 8mm or 10mm right hand thread (clockwise) each side, left or right. Stem length: 190mm centre to cen...
Piston outer diameter: 32mm. This kit contains an inner oil seal and an outer dust seal. Thickest seal: 3.17mm x 2.72mm. Thinner seal: 1.96m...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Glass outer diameter 110mm. 190mm stem length from centre of mirror to bend. 50mm from bend to end of thread. E-marked. Replacement aftermar...
Straight TR4 valve.
Trade Pack of 32mm OD brake caliper piston seals. Piston outer diameter: 32mm. Each kit contains an inner oil seal and an outer dust seal. T...
Outer diameter of the cap body that sits over the tank filler neck: 40mm. Includes two keys for fuel cap. Replacement aftermarket part for S...
Outer diameter 35mm. Inner diameter 22mm. Width 5mm.
Outer diameter 22mm. Inner diameter 12mm. Width 9mm.
Outer diameter 20.50mm. Length 34.70mm. Thickness 3.00mm. Heavy duty clutch springs.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 12mm. Thickness 2mm.
Replacement aftermarket part for the following OEM numbers: Kawasaki 46092-1111. Suzuki 57620-49111 .
Glass width 105mm. Glass height 105mm. 80mm stem length from mirror to bend. 60mm from bend to end of thread. Please note that mirrors are a...
Inner diameter 41mm. Outer diameter 53mm. Thickness 9.2mm.
Outer diameter 62mm. Inner diameter 33mm. Width 7mm.
Koyo 6307. Outer diameter 80mm. Inner diameter 35mm. Width 21mm. Made in Japan.
Outer diameter 139mm. Thickness 2mm. Number of pegs 28. Replacement aftermarket part for the following OEM numbers: Honda 22321-MT3-000, 223...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 53mm x Thickness 8mm x lip 9.5mm. Push-in type...
Thickness: 1.6mm. Number of pegs: 28. Width of pegs: 7.5mm. Outer diameter: 139mm. Inner diameter without teeth: 115mm. Inner diameter inclu...
Made in Japan.
3 bolt hole type.
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Made in Japan. This set includes the following items: 2 x shaft OD 22mm x ID 16mm x L 22mm. 2 x bearing OD 29mm x ID 22mm x W 20mm.
Top outer length: 730mm. Top free inner length: 32mm. Top fitting: 10mm thread. Bottom 1 fitting: 45' bend, 6mm outer diameter. Top nipple: ...
