Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 10. 19mm (3/4") reach. 0.6mm fine wire iridium centre e...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 10. 19mm (3/4") reach. 0.7-0.8mm gap.
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Upper or Lower depending on whether standard or USD forks. Outer diameter: 43.6mm. Inner diameter: 41.7mm. Width: 20mm. Thickness 0.95mm. Th...
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.10mm. Width: 12mm. Thickness: 1.95mm. Re...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Inner diameter 30mm. Outer diameter 52mm. Width 16mm. Made in Japan.
This kit includes the following bearings: Bearing 1: ID 30mm x OD 52mm x Thickness 16mm. Bearing 2: ID 30mm x OD 52mm x Thickness 16mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 30mm x OD 52mm x Thickness 16mm. Bearing 2: ID 30mm x OD 52mm x Thick...
12 volt 8AH 120 CCA. Length: 150mm x Width: 88mm x Height: 105mm. Replaces: 0092M60100, 0092M60150, 508012008, 508012008A514, 510901012, 6E9...
Please Note: This oil filter does not come with O-rings. Replacement for Hiflofiltro HF137, Champion X308. This will suit the following mode...
