Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF563.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR801.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR801.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 32. JT Part Number: JTR801.32. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 4. 12.7mm (1/2") reach. Standard 2...
Outer diameter 47mm. Inner diameter 23mm. Width 8mm.
Replacement aftermarket part for the following OEM numbers: Yamaha 22F-26341-00, 22F-26341-01, 22F-26341-02. Suzuki 58100-26000, 58100-01722...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 43.00mm. Gudgeon pi...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
50mm between hole centres.
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 42.00mm. Gudgeon pi...
Koyo 6201DDU. Double sided rubber sealed. Outer diameter 32mm. Inner diameter 12mm. Width 10mm. Made in Japan. Replacement aftermarket part ...
Outer diameter 16mm. Inner diameter 12mm. Length 16mm.
Outer diameter 110mm. Replacement aftermarket part for Suzuki OEM 64651-01001.
Outer diameter 42mm. Inner diameter 32mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
10mm spline size. 115mm length between centre of toe plate and centre of spline.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 41.50mm. Gudgeon pi...
Length: 35" (890mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork. Shorter cable 760mm use our SKU: 015928...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 41.00mm. Gudgeon pi...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 45.25mm. Gudgeon pi...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Replacement aftermarket part for Suzuki OEM 32341-43012.
Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement aftermarket part for the foll...
Replacement for FEW D77, DN61, Suzuki OE 32240-43012.
Steel sprocket. Replaces JT Sprockets JTR801-36.
