Steel sprocket. Replaces JT Sprockets JTF563-13.
Steel sprocket. Replaces JT Sprockets JTF563-15.
Brake light switch with 820mm lead length. Replacement aftermarket part for the following OEM numbers: Suzuki 57460-49100, 57460-45500, 5746...
Brake light switch with lead. 2 wires with bullet connectors.
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF563.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF563.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF563.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR801.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR801.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR801.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 32. JT Part Number: JTR801.32. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. Standard 2...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
50mm between hole centres.
Outer diameter 16mm. Inner diameter 12mm. Length 16mm.
Outer diameter 110mm. Replacement aftermarket part for Suzuki OEM 64651-01001.
Replacement aftermarket part for the following OEM numbers: Honda 44711-041-003, 44711-041-006, 44711-041-154. The Tread and RubberAn aggres...
Outer diameter 42mm. Inner diameter 32mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
10mm spline size. 115mm length between centre of toe plate and centre of spline.
Outer diameter 50.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Length: 35" (890mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork. Shorter cable 760mm use our SKU: 015928...
Glass width 105mm. Glass height 105mm. 80mm stem length from mirror to bend. 60mm from bend to end of thread. Please note that mirrors are a...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement aftermarket part for the foll...
