Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
For use with bulbs up to 10 watt.
Steel sprocket. Replaces JT Sprockets JTF425-16.
Steel sprocket. Replaces JT Sprockets JTF425-14.
Steel sprocket. Replaces JT Sprockets JTF425-15.
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR802.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF425.17. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Outer diameter 44mm. Inner diameter 30mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Suzuki 09283-30023. and man...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Starter Clutch Kit with One-Way Bearing for Electric Start Mechanism. Replacement aftermarket part for the following OEM numbers: Suzuki 232...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Clear version: For amber version use our SKU: 018214. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Outer diameter 110mm. Replacement aftermarket part for Suzuki OEM 64651-01001.
Replacement aftermarket part for Suzuki OEM 35612-28620, 35612-47040, 35652-39280.
Outer diameter 46mm. Inner diameter 37mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Inner diameter 27mm. Outer diameter 39mm.
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 45mm x Thickness 14mm. Bearing 2: ID 27mm x OD 48mm x Thick...
Outer diameter 52.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
