12v ignition coil. 2 spade terminals. Fits front or rear on V-twins. Fits left or right on twins. Centre-to-centre distance between mounting...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Earth wire l...
Steel sprocket.
12V 14.5AH CCA 175. Terminals: 4 (2 positive + 2 negative). Complete with battery terminals & connections. Battery can be rotated 180 de...
12V 11AH CCA 135A. Length: 135mm x Width: 90mm x Height: 145mm. Absorbed Glass Mat Technology. The perfect battery for Motorcycles, ATV's, P...
Outer diameter 47mm. Inner diameter 25mm. Width 8mm.
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Outer diameter: 275mm. Inner diameter: 56mm. Number of bolt holes: 6. Bolt holes OD: 8mm . Holes are non-countersunk. PCD (Pitch Circle Diam...
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Replacement aftermarket part for Suzuki OEM 35612-28620, 35612-47040, 35652-39280.
Made in Japan. Replaces Suzuki 59667-18441, 59667-18440.
Replacement aftermarket part for the following OEM numbers: Suzuki 37400-45012, 37400-45011, 37400-45013, 37400-45602, 37400-45603. and many...
Base Type: N2 H290701. This will suit the following models as well as those listed in fitments: Honda ATC200 1984-86. Honda ATC200 M 1984-85...
Steel sprocket. ID including splines: 21.7mm. OD without splines: 25mm. Width: 9mm. Bolt hole centres: 42mm. Chain pitch: 530mm. Replaces JT...
Outer diameter 14.5mm. Inner diameter 12mm. Stem 7mm.
Outer diameter 46mm. Inner diameter 37mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Please note: for models that have 14mm pins you will need to add 14mm bushes to your cart SKU: 019917. Suitable for early Japanese motorcycl...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Piston outer diameter 43mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Piston outer diameter 43mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 48mm x Thickness 15mm. Bearing 2: ID 27mm x OD 48mm x Thick...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF519.17. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Please Note: This switch may need modification to the single wire block by removing block and adding a male bullet connector and it only fit...
Height 65mm. Width 72mm. Replacement for Hiflofiltro HF133 & Champion X307. This filter does not come with an O-ring. Replacement afterm...
IMPORTANT - Please Note: The HT lead is only 170mm in length and for many models you will need a meter of our 7mm HT lead SKU: 023734 or 5 m...
Original Daiichi DNO-20 DNO-21. Made in Japan. Replacement aftermarket part for Suzuki OEM 33261-33010, 32341-31010, 33261-32410, 33263-3302...
