Type: K1. 4.40mm x 13.60mm. Can use with or without clip. Made in Japan. Replacement aftermarket part for the following OEM numbers: (Note: ...
This kit includes the following bearings and two seals: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thickn...
Fits cam chains supplied by us only.
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Cylinder head to rocker box mounting rubber. Outer diameter 25.5mm. Inner diameter 11mm. Thickness 2mm. Replacement aftermarket part for Suz...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Koyo 32005X. Inner diameter 25mm. Outer diameter 47mm. Width 15mm. Made in Japan. Bearing seal SKU: 013248. Replacement aftermarket part for...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
NTN 6204LLU. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Stem length: 47mm. Thread length: 22mm. Thread pitch: M10 (10mm) x 1.25mm. Robust, lightweight, and weather resistant. Complete with bulbs a...
Outer diameter 10mm. Inner diameter 7.75mm. Stem 4.5mm.
Replacement aftermarket part for Kawasaki OEM 92024-044
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Steel sprocket. ID including splines: 21.7mm. OD without splines: 25mm. Width: 9mm. Bolt hole centres: 42mm. Chain pitch: 530mm. Replaces JT...
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
Includes all the parts you need. OEM replacement, meets or exceeds OEM specs. Works Racing Parts (WRP)The WRP brand relies on two factors: a...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Outer diameter 42mm. Inner diameter 32mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Black centre. Outer diameter 240mm. Inner diameter 89mm. 5 bolt holes. 10mm bolt holes. Countersunk.
Comes with rivet link, no split link but these can be found under split links via search. The D.I.D ZVM-X Series utilizes our patented X-Rin...
